2017–2020 AD (6th generation)
2017–2020 Hyundai Elantra Tire Sizes, Pressure and Bolt Pattern
Every one of 3 factory tire sizes fitted to the 2017–2020 Hyundai Elantra, by trim and wheel diameter, with recommended cold pressures. Bolt pattern 5x114.3. Lug nuts torque to 80 lb-ft.
Last verified
Quick answer
2017–2020 Hyundai Elantra factory tire sizes
Check your manual| Trim / wheels | Tire size | Pressure (F/R) | Rating |
|---|---|---|---|
| SE (15-in) | 195/65R15 | 32 psi | 91H |
| Eco, SEL (16-in) | 205/55R16 | 33 psi | 91H |
| Limited, Sport (17-in) | 225/45R17 | 33 psi | 91V |
2017–2020 Hyundai Elantra bolt pattern and lug nut torque
| Spec | Value |
|---|---|
| Bolt pattern (PCD) | 5x114.3 |
| Lug nut torque | 80 lb-ft |
| Spare tire | Compact temporary spare (under trunk floor) or tire mobility kit depending on trim |
Tighten in a star pattern with a torque wrench, then re-check after roughly 50 miles. Wheels seat as they are driven. An impact gun routinely overshoots the figure above by 100 lb-ft or more, which warps rotors and stretches studs.
Which Hyundai Elantra model years does this cover?
These tire sizes specifications apply to every Hyundai Elantra built from 2017 through 2020 — the AD (6th generation), compact sedan. Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.
What changed during the 2017–2020 Hyundai Elantra
- 2017AD generation launch; 2.0L MPI base engine, 1.4T Eco introduced
- 20181.6T Sport sedan added, replacing the previous-generation naturally aspirated Sport
- 2019Facelift: new front/rear fascias, standard LED DRLs, available LED headlights on upper trims
- 2020Final model year before the CN7 redesign; carryover engines
2017–2020 Hyundai Elantra tire sizes: common questions
What size tires does a 2017–2020 Hyundai Elantra take?
- It varies by trim and wheel size, 3 factory fitments exist, from 195/65R15 up. Check the placard on the driver's door jamb for the size your specific vehicle left the factory with.
What is the bolt pattern on a 2017–2020 Hyundai Elantra?
- 5x114.3. That is the figure you need when shopping for aftermarket wheels; centre bore and offset still have to match separately.
What should the tire pressure be on a 2017–2020 Hyundai Elantra?
- 32 PSI front and rear, measured cold. The number moulded into the tire sidewall is the tire's maximum, not the vehicle's recommendation. Do not inflate to it.
What is the lug nut torque for a 2017–2020 Hyundai Elantra?
- 80 lb-ft, tightened in a star pattern with a torque wrench. Impact guns routinely overshoot this by 100 lb-ft or more, which warps rotors and stretches studs.
Does the 2017–2020 Hyundai Elantra come with a spare tire?
- Compact temporary spare (under trunk floor) or tire mobility kit depending on trim.
Sources
- Ontario Hyundai, Elantra oil type & capacity by model year (all AD engines)
- AMSOIL lookup, 2018 Elantra 2.0L MPI oil spec/capacity
- AMSOIL lookup, 2018 Elantra 1.4L Turbo oil spec/capacity
- AMSOIL lookup (CA), 2018 Elantra 1.6L Turbo oil spec/capacity
- NHTSA recall 21V-301, 2.0L Nu MPI piston oil ring defect
- NHTSA recall 17V-213, MDPS steering connector
- NHTSA recall 17V-063, brake booster failure
- Hyundai Motor America press release, 2022 Engine II litigation settlement
- Edmunds, 2018 Elantra specs (curb weight, fuel tank, mpg)
- Cabin air filter 97133-F2000 fitment (2017–2023 Elantra)
- Engine air filter 28113-F2000 fitment (2017–2020 Elantra)