WhichCarParts

2012–2016 4th generation (RM)

2012–2016 Honda CR-V Oil Type and Capacity

The 2012–2016 Honda CR-V takes 0W-20 engine oil, 4.4 quarts with a filter change by engine. OEM filter Honda 15400-PLM-A02 (spin-on). Verified against factory documentation, with change intervals and aftermarket filter equivalents.

Last verified

Quick answer

The 2012–2016 Honda CR-V (2.4L 4-cylinder (K24Z7, port injection), 2012–2014) takes 0W-20 engine oil, 4.4 quarts with a filter change (OEM filter Honda 15400-PLM-A02 (spin-on)). Other engines differ. See the table below.

2012–2016 Honda CR-V 2.4L 4-cylinder (K24Z7, port injection), 2012–2014 oil

High confidence
SpecValue
Viscosity0W-20
Oil standardAPI SN / ILSAC GF-5 (later API SP / GF-6A fine)
Capacity (with filter)4.4 qt / 4.2 L
Synthetic requiredNo (synthetic recommended)
OEM filterHonda 15400-PLM-A02 (spin-on)
Aftermarket filtersFram XG7317 (Ultra), Wix 57356, Mobil 1 M1-110A, Purolator PL14612
Change intervalPer Maintenance Minder (typically 5,000–7,500 mi real-world); oil life 15% = due soon, 0% = overdue
Drain plug torque29 ft-lbs

Honda 'recommends' but does not strictly require full synthetic for 0W-20; virtually all 0W-20 on the market is synthetic. Some quick guides list 4.2 qt, the owner's manual change capacity with filter is 4.4 US qt. Check the dipstick.

2012–2016 Honda CR-V 2.4L 4-cylinder (K24W9 'Earth Dreams', direct injection), 2015–2016 oil

High confidence
SpecValue
Viscosity0W-20
Oil standardAPI SN / ILSAC GF-5
Capacity (with filter)4.6 qt / 4.4 L
Synthetic requiredNo (synthetic recommended)
OEM filterHonda 15400-PLM-A02 (spin-on)
Aftermarket filtersFram XG7317 (Ultra), Wix 57356, Mobil 1 M1-110A
Change intervalPer Maintenance Minder (typically 5,000–7,500 mi real-world)
Drain plug torque29 ft-lbs

The direct-injected K24W9 holds 4.6 qt with filter, slightly more than the 2012–2014 K24Z7. Direct injection makes oil quality and interval discipline matter more (fuel dilution, intake-valve deposits).

Which Honda CR-V model years does this cover?

These oil specifications apply to every Honda CR-V built from 2012 through 2016 — the 4th generation (RM), compact crossover suv (fwd or real time awd). Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.

What changed during the 2012–2016 Honda CR-V

  • 2012Generation launch: K24Z7 2.4L, 5-speed automatic, FWD or Real Time AWD
  • 2013Carries over unchanged from the 2012 redesign
  • 2014Carries over unchanged; base price rises about $150 across the lineup
  • 2015Major refresh: direct-injected Earth Dreams 2.4L (K24W9) + CVT, new Touring trim with 18-in wheels, Honda Sensing introduced on Touring
  • 2016SE trim added; final year of the generation

2012–2016 Honda CR-V oil: common questions

How many quarts of oil does a 2012–2016 Honda CR-V take?

It depends on the engine. The 2.4L 4-cylinder (K24Z7, port injection), 2012–2014 takes 4.4 quarts; The 2.4L 4-cylinder (K24W9 'Earth Dreams', direct injection), 2015–2016 takes 4.6 quarts, all figures include a new filter.

What kind of oil does a 2012–2016 Honda CR-V take?

0W-20 meeting API SN / ILSAC GF-5 (later API SP / GF-6A fine). Other engines in this vehicle may differ; see the table above.

Can you use a different viscosity in a 2012–2016 Honda CR-V?

The factory specification is 0W-20 and no alternate grade is listed for this engine. Modern variable-valve-timing hardware is sized around the specified viscosity, so substituting a thicker oil is not a free choice.

How often does a 2012–2016 Honda CR-V need an oil change?

Per Maintenance Minder (typically 5,000–7,500 mi real-world); oil life 15% = due soon, 0% = overdue. Short trips, towing, extended idling, and dusty or very cold conditions all put the vehicle on the severe-service side of that interval.

What oil filter does a 2012–2016 Honda CR-V take?

The OEM filter is Honda 15400-PLM-A02 (spin-on). Common equivalents: Fram XG7317 (Ultra), Wix 57356, Mobil 1 M1-110A, Purolator PL14612. Torque the drain plug to 29 lb-ft. An overtightened plug strips an aluminium pan.

Sources