WhichCarParts

2013–2020 CD4 (second generation)

2013–2020 Ford Fusion Tire Sizes, Pressure and Bolt Pattern

Every one of 4 factory tire sizes fitted to the 2013–2020 Ford Fusion, by trim and wheel diameter, with recommended cold pressures. Bolt pattern 5x108. Lug nuts torque to 100 lb-ft.

Last verified

Quick answer

The 2013–2020 Ford Fusion came with 4 factory tire sizes depending on trim, from 215/60R16 (S (16-in)) up. Check the table for your trim.

2013–2020 Ford Fusion factory tire sizes

Check your manual
Trim / wheelsTire sizePressure (F/R)Rating
S (16-in)215/60R1632 psi95H
SE, SEL, Hybrid (17-in)225/50R1733 psi93V
SE, Titanium (17-in, alternate fitment)235/50R1733 psiN/A
Sport, Titanium (18-19-in)235/45R1835 psi91V

2013–2020 Ford Fusion bolt pattern and lug nut torque

SpecValue
Bolt pattern (PCD)5x108
Lug nut torque100 lb-ft
Spare tireCompact temporary spare on most trims; some higher trims ship with a tire inflator kit instead

Tighten in a star pattern with a torque wrench, then re-check after roughly 50 miles. Wheels seat as they are driven. An impact gun routinely overshoots the figure above by 100 lb-ft or more, which warps rotors and stretches studs.

Which Ford Fusion model years does this cover?

These tire sizes specifications apply to every Ford Fusion built from 2013 through 2020 — the CD4 (second generation), mid-size sedan. Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.

What changed during the 2013–2020 Ford Fusion

  • 2013All-new CD4-platform generation launches; MyFord Touch standard on upper trims; 1.6L EcoBoost and 2.0L EcoBoost debut alongside the base 2.5L; Hybrid and plug-in Energi added.
  • 20141.5L EcoBoost replaces the 1.6L EcoBoost mid-cycle.
  • 2015Standard rearview camera added across the lineup (gas, hybrid, and Energi plug-in); manual transmission dropped mid-year for the SE trim.
  • 2016MyFord Touch continues for its final year ahead of 2017's Sync 3 switch; minor trim and feature shuffles only.
  • 2017Mid-cycle facelift: new front/rear fascias, Sync 3 replaces MyFord Touch, revised twin-scroll 2.0L EcoBoost, and the 2.7L EcoBoost V6 Sport (AWD-only) returns to the lineup.
  • 2018Carryover year between the 2017 facelift and 2019's Ford Co-Pilot360 update; S/SE/SEL/Titanium/Sport lineup unchanged.
  • 2019Ford Co-Pilot360 safety suite (automatic emergency braking, lane-keeping assist, blind-spot/rear-cross-traffic warning, automatic high beams, auto wipers) becomes standard; Platinum trim dropped, SEL added, Hybrid no longer offered in base S trim, Energi's EV range rises from 22 to 25 miles.
  • 2020Final US model year, Sport trim and 2.7L V6 discontinued for 2020; Ford ends Fusion production for the US market after this year.

2013–2020 Ford Fusion tire sizes: common questions

What size tires does a 2013–2020 Ford Fusion take?

It varies by trim and wheel size, 4 factory fitments exist, from 215/60R16 up. Check the placard on the driver's door jamb for the size your specific vehicle left the factory with.

What is the bolt pattern on a 2013–2020 Ford Fusion?

5x108. That is the figure you need when shopping for aftermarket wheels; centre bore and offset still have to match separately.

What should the tire pressure be on a 2013–2020 Ford Fusion?

32 PSI front and rear, measured cold. The number moulded into the tire sidewall is the tire's maximum, not the vehicle's recommendation. Do not inflate to it.

What is the lug nut torque for a 2013–2020 Ford Fusion?

100 lb-ft, tightened in a star pattern with a torque wrench. Impact guns routinely overshoot this by 100 lb-ft or more, which warps rotors and stretches studs.

Does the 2013–2020 Ford Fusion come with a spare tire?

Compact temporary spare on most trims; some higher trims ship with a tire inflator kit instead.

Sources

Other Ford Fusion generations