2020–2025 Nissan Sentra Wiper Blade Sizes

Which Nissan Sentra model years does this cover?

These wiper blades specifications apply to every Nissan Sentra built from 2020 through 2025 — the B18 (8th generation), compact sedan (independent rear suspension). Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.

What changed during the 2020–2025 Nissan Sentra

• 2020Generation launch: 2.2 in wider, independent rear suspension, 149-hp MR20DD, CVT only, Safety Shield 360 standard
• 2023Minor equipment shuffle; last pre-facelift year
• 2024Facelift: new front fascia and grille, updated wheels and infotainment, slightly better EPA ratings; mechanical specs carry over
• 2025Carryover year, final year of the B18 covered here (an all-new Sentra follows for 2026)

What size wiper blades does a 2020–2025 Nissan Sentra take?

26 inches on the driver's side and 17 inches on the passenger's side.

Can you fit a longer wiper blade on a 2020–2025 Nissan Sentra?

Going up one inch usually clears, but it is not free: an oversized driver's blade can overlap the passenger blade at the top of the sweep, or run off the edge of the glass and chatter. The factory sizes are chosen to sweep the maximum area without contact.

What wiper connector does a 2020–2025 Nissan Sentra use?

Small-hook arms; most charts list 26/17, a few list a 16-in passenger blade, either clears fine, but measure the old blade before buying. Blade packaging lists the connector type. Match it or the adapter will not latch.