How to Reset the Oil Life Indicator on a 2018–2025 Jeep Wrangler

Which Jeep Wrangler model years does this cover?

These oil life reset specifications apply to every Jeep Wrangler built from 2018 through 2025 — the JL (3rd generation), off-road suv, solid front/rear axle (2-door; 4-door unlimited). Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.

What changed during the 2018–2025 Jeep Wrangler

• 2018JL launch; note that some dealers/titles carried over 'Wrangler JK' badging into 2018 for leftover previous-generation stock, a 2018-titled Wrangler may mechanically be a JK. Confirm by VIN/generation, not just model year.
• 2019eTorque mild hybrid introduced as an option on the 2.0L turbo
• 20203.0L EcoDiesel V6 added; eTorque became optional on the 3.6L V6
• 20214xe plug-in hybrid and Rubicon 392 (6.4L V8) both launch
• 2022New High Tide and Beach special editions added; minor equipment shuffling across trims; 4xe becomes the only Wrangler variant offered in Europe
• 2023Air conditioning becomes standard on all trims; Uconnect 4 replaces Uconnect 3 with a 7-in touchscreen standard (up from 5-in); Rubicon 20th Anniversary special edition
• 2024eTorque dropped from the lineup entirely
• 20253.6L V6 automatic reportedly phased toward manual-only on some trims as Jeep leans further into the 2.0L turbo and 4xe; verify current-year trim/engine availability before ordering parts

How do you reset the oil life on a 2018–2025 Jeep Wrangler?

4 steps, using only the controls in the car, the full sequence is above.

Do you need a scan tool to reset the oil light on a 2018–2025 Jeep Wrangler?

No. The procedure above uses the vehicle's own controls. A scan tool is only necessary if the reset does not take, which usually points at a different fault.

Why won't the oil light reset on a 2018–2025 Jeep Wrangler?

Almost always a timing problem in the sequence, a step held too briefly, or the ignition in the wrong position. Repeat it exactly, with the engine off and the key in accessory rather than run, unless the steps say otherwise. JL replaced the JK's accelerator-pedal trick with a cluster-menu reset. Works the same way across gas, diesel, and 4xe powertrains.