How to Reset the Oil Life Indicator on a 2014–2019 Toyota Corolla

Which Toyota Corolla model years does this cover?

These oil life reset specifications apply to every Toyota Corolla built from 2014 through 2019 — the E170 (11th generation), compact sedan. Nothing in this specification changes between those model years. Pick your year for the engines it offered, what changed that year, and the problems recorded against it.

What changed during the 2014–2019 Toyota Corolla

• 2014Generation launch; LED low beams standard on all trims; CVT replaces the 4-speed auto on most trims (4AT lingers on base L through 2016); LE Eco with 140-hp Valvematic 2ZR-FAE added
• 2016Oil filter changes from cartridge (04152-YZZA6) to spin-on (90915-YZZF2) per Toyota's filter application chart; Special Edition trim with 17-in wheels
• 2017Facelift: new fascias, standard Toyota Safety Sense-P (auto emergency braking) on all trims, S trims replaced by SE/XSE, XLE added, bi-LED headlights on upper trims
• 2019Final E170 sedan year (the 2019 Corolla Hatchback is already the new E210 platform)

How do you reset the oil life on a 2014–2019 Toyota Corolla?

5 steps, using only the controls in the car, the full sequence is above.

Do you need a scan tool to reset the oil light on a 2014–2019 Toyota Corolla?

No. The procedure above uses the vehicle's own controls. A scan tool is only necessary if the reset does not take, which usually points at a different fault.

Why won't the oil light reset on a 2014–2019 Toyota Corolla?

Almost always a timing problem in the sequence, a step held too briefly, or the ignition in the wrong position. Repeat it exactly, with the engine off and the key in accessory rather than run, unless the steps say otherwise. On 2017–2019 cars with the 4.2-in multi-information display you can also reset via the steering-wheel arrows: Settings (gear icon) → Scheduled Maintenance → press and hold OK → confirm.